When the wires run hot...
The crowd cheers when the speakers get turned up to capacity. Then not only the spirits heat up, but also the cables. Here too the highest of demands are placed on the cable, meaning that the outer cable jacket has to be as thick as elephant skin. It should also be flexible, treadable, easily windable, and of course reusable.Especially mentioned should be the combi-special cable ELEPHANT SPM4025 for use with woofers and surround systems.
The SPM4025 has a total of 6 wires, 4 for the bass range with a diameter of 4.0 mm 2 (strand diameter 0.20 mm 2 ) and 2 wires for the high frequency range with a diameter of 2.5 mm 2 (strand diameter 0.15 mm 2 ). Based on this stranding technique commonly used for HiFi-cables the SPM4025 transmits a crystal clear high frequency range and a clean, dynamic bass signal.
Compare them to other speaker cables. The ELEPHANT will convince you!
Now also available in a halogen-free FRNC-version (test type C)!
THE ADVANTAGES:
- Loss-free transmission due to the special stranding
- Highly flexible (PVC-version only) and suitable for the stage
- Compatible with common Neutrik-Speakon plug connectors
- Easy to wind
- Easy to work with due to good insulation and numbered wiring
THE APPLICATION:
- Professional PA/sound systems
- Surround und woofer systems
- For fixed installation in building technology
TECHNICAL DATA: |
|
| Construction | (8LIY2.5mm 2 )Y |
| Jacket, diameter | 12,5 mm |
| AWG | 13 |
| No. of conductors | 8 x 2,5 mm 2 |
| Material jacket, insulation | PVC |
| Copper strand per conductor | 50 x 0,25 mm |
| Conductor insulation, diameter | 3,05 mm |
| Temperature range | min. -30 °C |
| Temperature range | max. 70 °C |
| Fire load per m | 0,58 kWh |
| Weight per 1 m | 318 g |
| Jacket color |   black |
| Packaging | per m |
ELECTRICAL DATA: |
|
| Cond. resistance per 1 km | < 7,8 Ohm |
| Insulat. resistance per 1 km | > 5 MOhm |
| Operation voltage | max. 300 V |
| Test voltage | 2 kV |